A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Differential: Overhaul
Self-Locking Center Differential, Transmission Installed
Self-Locking Center Differential, Transmission Installed
Special tools, testers and auxiliary items required
‹› Drip Tray (V.A.G 1306)
‹› Torque Wrench (V.A.G 1331)
Removing
-
Disconnect exhaust system at double clamps - arrows -.
‹› Flex joint in front exhaust pipe must not be bent more than 10°, otherwise it may be damaged.
‹› The exhaust system with the 3.0L V6 gasoline engine is shown in the illustration.
-
Disengage rear part of exhaust system at retaining loops and remove.
‹› A second technician is needed to remove the rear section of the exhaust system.
-
Remove the driveshaft heat shield - arrows -, where applicable.
-
Remove exhaust system heat shield - 1 - below shift mechanism - arrows -.