A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Determining thickness of adjustment shim "S 4"
Formula: "S4" = "Stotal" - " S3"
-
Determine shim(s) according to table.
Available adjustment shims for " S4"
Checking Measurement
Check dimension "r"
-
Install drive pinion with hollow shaft with measured out adjustment shims "S3" and "S4".
-
Turn hollow shaft against pinion 5 revolutions in both directions so that double tapered roller bearing settles.
-
Then, turn drive pinion with hollow shaft 5 rotations in both directions to settle the tapered roller bearing.
-
Install Universal Mandrel and perform measurement check.