A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
/Page-2007006.png)
-
Pry out flange shaft seal - arrow - using a lever.
Right Flange Shaft Sealing Ring, Installing
-
Lightly oil the outer circumference of the new seal.
-
Drive in new flange shaft sealing ring with Drift (2062) without tilting seal.
‹› Drive-in depth: 5.50 ± 0.15 mm under surface of cover.
-
Fill area between sealing lip and dust lip halfway with Sealing Grease (G 052 128 A1).
