audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Installation Position of Selector Mechanism|Page 6687 > < Installation Position of Selector Mechanism|Page 6685
Page 1
background image

Shifter M/T: Removal and Replacement
Selector Mechanism, Removing and Installing

Selector mechanism, removing and installing, 02X, 6-Speed Four-Wheel Drive M/T

Special tools, testers and auxiliary items required

^

Engine/transmission jack V.A.G 1383 A

Removing

-

Remove gear lever knob together with boot.

Vehicles with large radio slot:

-

Remove air conditioning operating unit.

Vehicles with small radio slot:

-

First lift trim panel - 1 - in direction of - arrow A -, then pull it out in direction of - arrow B -.

Continued for all vehicles:

-

Remove bolts - arrowsC - and then pull ashtray - 2 - out of center console.

-

Disconnect electrical connector for ashtray light.

-

Remove foam wedges from center console.

-

Lift out sound insulation.

-

Remove sound insulation for gear lever housing - arrows -.

Installation Position of Selector Mechanism|Page 6687 > < Installation Position of Selector Mechanism|Page 6685