A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
-
Remove nuts - arrows -.
-
Remove both front wheels.
-
On vehicles equipped with auxiliary heater, remove bolts - arrows - securing exhaust pipe of auxiliary heater to sound insulation.
-
Loosen bolts/quick release fasteners - 1 - and - 2 - and remove front sound insulation - A -.
-
If installed, loosen quick release fasteners - 3 - and remove rear sound insulation - B -.
-
Remove bracket for sound insulation - arrows -.
-
Disconnect exhaust system at clamps - arrows -.
Note:
^
The flexible pipe connection (de-coupling element) in the front exhaust pipe must not be bent more than 10° - otherwise it can be damaged.
^
The illustration shows the exhaust system in conjunction with the 3.0 liter. V6 engine.