A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Differential Mount: Service and Repair
Rear Differential Mount
Special tools, testers and auxiliary items required
‹› Assembly Tool (T40032)
‹› Engine/Transmission Jack (V.A.G 1383 A )
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
Removing
-
Place Engine/Transmission Jack (V.A.G 1383 A ) with Universal Transmission Support (1359/2 ) under rear final drive and secure rear final drive.
-
Remove bolts from transmission supports and rear final drive - arrows -.
-
Remove the driveshaft from rear final drive.
-
Secure driveshaft to body with wire.
-
Remove combi-bolts on differential mount.
-
Remove rear crossmember/rear final drive bolts.
‹› Lower rear final drive enough so that upper bolt can be removed.
-
Remove rear crossmember downward.
-
Use Assembly Tool (T40032) as shown in illustration and remove differential mount.