A4 Quattro Cabriolet V6-3.2L (BKH) (2007)
Front Door Window Motor: Service and Repair
Window Regulator Motor
Removing
-
Remove door trim.
‹› Motor for window regulator can be removed or installed in every position of motor or side window.
-
Disconnect electrical connectors.
-
Remove bolts - 2 - and remove motor - 1 -.
Installing
-
Ensure threaded pins - arrows - are engaged in door inner panel.
-
Slide on window regulator motor - 1 - and secure with bolts - 2 -.
-
Attach electrical connector.
‹› After installing motor, switch ignition on and off again with wires connected.
‹› Then move door window upward to stop and keep pressing switch for window regulator for approx. 2 seconds longer.
‹› This position is the base position and the high- and low-running function is activated.
Tightening torques => [ Window Regulator Assembly Overview ] See: Window Regulator/Front Door Window Regulator/Service and
Repair/Front Door Window Regulator Assembly Overview.