A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
/Page-6644001.png)
Trunk / Liftgate Latch: Service and Repair
Rear Lid Lock Actuator, Removing and Installing
Rear Lid Lock Actuator, Removing And Installing
Removing
-
Remove lock cylinder.
-
Push out retaining pins - 3 - (2x).
-
Push tab - 4 - back and disconnect.
-
Remove rear lid lock actuator - 1 -.
Installing
-
Set lock cylinders in "open" position.
-
Slide ridged plate - 1 - to left.
First ridge on plate - 1 - must snap into first groove on grooved segment - 2 -.
