A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
Trim Panel: Service and Repair
D-Pillar Trim, Removing and Installing
D-Pillar Trim, Removing And Installing
-
Remove side panel.
-
Remove side trim.
WARNING: Follow safety precautions for working on head-level airbag.
Removing
-
Remove D-pillar trim (use assembly hooks for easier removal).
Installing
-
Install trim at roof panel trim, guide centering pin to centering hole and position retaining clips.
-
Swing D-pillar trim in direction of arrow and attach to body.
CAUTION:
-
During installation, D-pillar trim must be inserted in guide groove of roof edge trim.
-
Retaining clips are not necessarily right angled. If clips are separated from the D-pillar trim during removal, make sure it is properly
angled when installing.