A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
/Page-5697003.png)
-
Remove felt ring.
-
Install spacer VAG 1719/1 onto pulley hub.
-
Install puller -B- (US 1078, Kukko 20-10 or equivalent) at shoulder -A- and remove pulley.
CAUTION!
Do not use any other surface to remove pulley or damage will result.
Fig. 4 Installing belt pulley
-
Clean all contact surfaces.
-
Install belt pulley using adapter VAG1719/2 and plastic hammer.
Fig. 5 Installing clutch coil
-
Position pin -A- in recess.
