A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
Tail Lamp: Service and Repair
Tail Lights, Removing and Installing
Tail Lights, Removing And Installing
Removing
-
Disconnect harness connector -C-.
-
Remove combination nuts (arrows) 4 Nm (35 in. lb).
-
Push lamp and its assembly toward rear.
NOTE:
-
The seal is glued tightly to the housing.
-
The wiring with harness connector must be moved near the edge protection -D-.
Installing
-
Install in reverse order of removal.