A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
/Page-1641002.png)
-
Remove lower toothed belt cover (arrows).
-
Using Torx wrench T45, loosen toothed belt tensioner (lower arrow).
-
Push toothed belt tensioner downward.
-
Remove toothed belt.
Installing (adjust valve timing)
Note:
-
Use the following procedure to adjust toothed belt, even for repairs that only require removal of toothed belt from camshaft gear.
-
Adjustments can be made on a hot or cold engine.
CAUTION! When turning camshaft, crankshaft may not be at TDC for any cylinder. Valves and/or piston heads may be damaged.
-
Align marking on camshaft gear to marking on cylinder head cover.
