A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
/Page-2953002.png)
If wiring is OK:
-
Replace Motronic Engine Control Module (ECM) -J220-.
-
Carry out adaptation of throttle valve control module to ECM.
-
Check readiness code. If Diagnostic Trouble Code (DTC) memory has been erased, or ECM was disconnected, generate new readiness code.
Refer to "Monitors, Trips and/or Drive Cycle/Displaying Readiness Code" See: Testing and Inspection
Refer to "Monitors, Trips and/or Drive Cycle/Generating Readiness Code" See: Testing and Inspection
