A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
Display Group 1
If displayed values are OK (as specified):
-
Press -C- button.
-
Press buttons -0-, -5- and -6- to input display group number 56, and press -Q- button to confirm input.
Indicated on display (1-4 = display fields)
System in Basic Setting 56
->
1 2 3 4
-
Compare display with specified values (display fields 1-4):
Display Group 56
-
Press -> button to advance program sequence.
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Road test vehicle, then repeat test.
-
Check readiness code. If Diagnostic Trouble Code (DTC) memory has been erased, or ECM was disconnected, generate new readiness code.
Refer to "Monitors, Trips and/or Drive Cycle/Displaying Readiness Code" See: Computers and Control Systems/Testing and Inspection
Refer to "Monitors, Trips and/or Drive Cycle/Generating Readiness Code" See: Computers and Control Systems/Testing and Inspection