A4 Quattro Sedan L4-1.8L Turbo (AEB) (1998)
/Page-1190003.png)
-
Disconnect 8-pin harness connector from throttle valve control module -J338-.
-
Check wiring for open circuit between ECM/test box and 8-pin harness connector.
-
Connector terminal 5 to ECM/test box socket 75
-
Specified value: max. 1.5 Ohms
If wiring is OK:
-
Replace throttle valve control module -J338-.
-
Carry out adaptation of throttle valve control module to ECM.
-
Check readiness code. If Diagnostic Trouble Code (DTC) memory has been erased, or ECM was disconnected, generate new readiness code.
