A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
Front Door Exterior Handle: Locations
Front door handle (From m.y.1999 VIN 8D XA 200 001), assembly overview
1
-
Door handle
-
Remove door trim.
-
Remove door component carrier.
2
-
Securing pins
-
When installing, be sure securing spring reaches completely around hinge arm
3
-
Front doors
4
-
Seal for door handle
-
Removing and installing see Fig. 2
5
-
Mount for door handle
6
-
Harness connector
-
Only vehicles with anti-theft warning system
7
-
Cover for door lock
-
To remove, unclip at top first then pull bottom toward rear of door lock and off
8
-
Operating rod
-
Before removing door handle, disengage at clip
9
-
Operating clip
10
-
Securing rod-lock cylinder