audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Subframe, Removing and Installing|Page 12654 > < Subframe, Removing and Installing
Page 2
background image

CAUTION:  Install a support device (e.g. VAG1383A transmission jack) to prevent damage to the lower link joints resulting from excessive
rebound travel in the suspension.

-

Remove nuts -3-.

-

Loosen bolts -1- (attaching lower guide links to subframe).

-

Remove bolts -1-.

-

Remove bolts -2- and lower subframe at rear.

Note:  To prevent the outer joints on the lower track control link and guide link from being bent too far, secure the links to the car body using a
piece of wire or similar.

-

Remove bolts for lower guide links.

-

Remove lower guide links from subframe.

-

Remove bolts -5-.

Subframe, Removing and Installing|Page 12654 > < Subframe, Removing and Installing