A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
7
-
Lock carrier
Removing:
-
Remove bumper.
-
Remove noise insulation panel.
-
Disconnect hood lock cable.
-
Drain engine coolant and disconnect coolant hoses Fig. 5.
-
Disconnect condenser from lock carrier only (do not disconnect any lines) and secure with wire (e.g. at front wheel).
NOTE:
-
Do not suspend condenser by its lines.
-
Condenser lines must not be bent or kinked under any circumstances.
-
Remove hydraulic oil cooler only (do not disconnect lines) Fig. 4.
NOTE: