A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
^
Disconnect heater hose at rear of coolant pipe -2-. To do this, release retaining clip on connecting flange.
^
Pull off coolant hose to oil cooler -4- at coolant pipe.
^
Remove bolt -3-.
^
Push lower coolant pipe toward rear of vehicle and remove.
^
Remove plug -5- if necessary.
Installing
Installation is carried out in the reverse order of removal.
Note: Always replace seals and gaskets.
^
Before installing, clean and smooth down sealing surface for O-ring.
^
Moisten new O-ring -1- with G 012 A8 D and slide onto coolant pipe -2-.
^
Push coolant pipe into opening in cylinder block.
^
Top up coolant.