A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
/Page-1325002.png)
11. Bottom coolant pipe
12. Screw plug - 15 Nm
13. Sealing ring
^
If seal is leaking, cut open and replace
14. Oil supply pipe
^
To turbocharger
15. Banjo bolt - 30 Nm
16. Seals
^
Always replace
17. Oil pressure switch F -1-, 1.4 bar 25 Nm
^
Black insulation
18. Sealing ring
^
If seal is leaking, cut open and replace
19. 15 Nm + 1/4 turn(90°C) further
^
Always replace
20. Gasket
^
Always replace
^
Engage in projections on oil cooler
21. Oil filter
^
Observe change intervals
^
Observe installation instructions on oil filter
^
Tighten to 20 Nm
22. 25 Nm
23. Oil cooler
^
Ensure clearance to adjacent components
^
Coolant hose connection diagram
24. Oil filter bracket
^
With pressure relief valve, approximately 4 bar
