A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
-
Mark positions of mountings -1- and locating sleeves -2- on left and right engine mountings (lower).
Note:
Different mounting holes are provided for the different engine versions.
-
Remove nut -1- from lower right of engine mounting.
-
Completely remove left engine mounting.
-
Support subframe with workshop crane VAG 1202A.
-
Remove front subframe bolts -2- and -3- (left and right) and loosen bolts -1-
Note:
The subframe should be disconnected and lowered at the front only, otherwise it will be necessary to check the wheel alignment.
Vehicles with manual gearbox