A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
-
Unbolt lower and center section of toothed belt guard -arrows-.
-
Attach socket head fastener T10092 into the tensioner for toothed belt.
-
Only tension pressure piston of tensioner until pressure piston is secured with pin T40011.
-
Take off toothed belt.
Installing (adjusting valve timing)
Note:
The position of the toothed belt must be set as described below, even after repairs in which the belt is only taken off the camshaft sprocket.
When turning the camshaft, the crankshaft must not be at TDC at any cylinder. There is a danger of damage to valves/piston crown.