A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
Clutch Switch: Service and Repair
Clutch Pedal Position (CPP) switch -F1 94-, removing and installing
Note: The clutch pedal position switch -F194- allows the engine to be started only with the clutch pedal depressed. Introduction 05.97
1. Mounting bracket
2. Cable bracket
3. Locking clip
4. Pin and locking plate
-
Latched in clutch pedal
5. Clutch pedal
-
Removing and installing, See: Transmission and Drivetrain/Clutch/Clutch Pedal Assembly/Service and Repair/5 Speed Manual Transmission
01A All Wheel Drive/Clutch Pedal and Over-Center Spring, Removing and Installing
6. Clip
7. Bracket for harness connector
8. Clutch Pedal Position (CPP) switch -F194
-
Adjusting, See: Adjustments
9. Clip
10. Screw and washer assembly
-
8 Nm (71 inch lbs.)
11. Mounting plate