A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal and Over-Center Spring, Removing and Installing
Clutch Pedal and Over-Center Spring, Removing and Installing
Removing
-
Remove driver's side storage compartment.
-
If installed, remove switch above clutch pedal.
-
Unclip pin and locking plate using screwdriver (arrow-1-), remove pin and locking plate (arrow-2-), and detach clutch pedal from clutch master
cylinder.
-
Press locking clip for clutch pedal off pivot pin using screwdriver.
-
Remove bolt (arrow).
-
Press clutch and brake pedal pivot pin out toward right, until clutch pedal can be removed.
-
If necessary, press locking clip for brake pedal off pivot pin using screwdriver.
-
Remove clutch pedal and over-center spring.
Installing
Installation is the reverse of removal.