A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
Shift Linkage: Service and Repair
Shift Linkage, Servicing
Notes:
-
Adjusting, Refer to Shift Linkage,MT, Adjustments.
-
To remove the complete shift linkage, remove the exhaust system.
-
To disassemble the shift linkage in the installation position, the shift mechanism housing must be lowered.
1. Shift knob
2. Bushing
3. Housing cover
-
Carefully pry out latch in rear section of center console
4. Top part of retaining frame
5. Bottom part of retaining frame
6. Bushing
7. Sleeve
8. Circlip
-
Do not overstretch when installing
9. Spacer bushing
10. Compression - spring
11. Ball stop
-
Insert compression spring and bushing into the ball stop and assemble on shift mechanism so that compression spring and bushing are on right
(direction of travel)