A4 Quattro Sedan L4-1.8L Turbo (AWM) (2001)
/Page-5607001.png)
Front Door Window Glass: Adjustments
Front Window, Adjusting
-
Make reference mark (measurement - a - = 9 mm) on window using water soluble pen at height of B-pillar.
-
Adjust window in mount at window regulator.
-
Run window almost all the way up.
The window - 1 - and the seal - 4 - for the door component carrier must be parallel to each other in the vicinity of roof and A-pillar.
-
Push window - 1 - in direction of B-pillar - 3 -.
NOTE: Window - 1 - must submerge 9 mm (measurement - a -) into seal - 4 - for door component carrier - 3 -.
-
Tighten bolts on mount at window regulator.
Tightening torque: 6.5 Nm (58 in.lb)
-
Run window - 1 - all the way up.
-
Check measurement - a - and erase reference marking.
