A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
CAUTION!
Make sure light does not reflect off the calibration platform.
Reflections affect the rear view camera (R189) and may make it impossible to perform the calibration.
-
Switch on laser - 1 - on calibration platform and align entire calibration platform so that laser beam hits center above of Audi rings.
-
Make sure the Audi rings are centered on the rear. Adjust the laser beam as needed.
-
Switch Distance Laser (VAS 6350/2) on with ON button.
The following display appears and laser is switched on.