A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Remove the door lock - 1 - and disconnect the electrical connector - 2 -.
Installation
‹› Tightening specifications, refer to => [ Striker Pin, Door Lock and Door Opener Actuating Link Assembly Overview ] See: Service and
Repair/Front Doors.
Installation is reverse of removal, but note the following:
-
Engage the actuating link - 3 - in the door lock operating lever - 2 -.
-
Insert the operating cable into the cable mounting bracket - 1 - and rotate the lever - 4 - 90° - arrow -.
‹› The lever must engage audibly with the locking tab on the cable mounting bracket.
-
Install the door lock cover. Refer to => [ Door Lock Cover ] See: Service and Repair/Front Doors/Door Lock Cover
-
Install the inner door panel cover. Refer to => [ Door Inner Panel Cover ]. See: Service and Repair/Front Doors/Door Inner Panel Cover
-
Install the door trim..
-
Install the lock cylinder. Refer to => [ Lock Cylinder ]. See: Service and Repair/Front Doors/Lock Cylinder