A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Place the tools on the front bonded rubber bushing as shown in the illustration.
1. (T10254/4)
2. Press piece (T40033/7)
3. Subframe
4. Bonded rubber bushing
5. Thrust pad (T40186/2)
6. (T10205/4)
7. (VAS 6178)
8. (T10254/4)
9. (T10254/5). The spindle pins face downward.
-
Pull bearing into subframe until stop.
‹› If paint damage has occurred during bearing replacement, repair using corrosion protection, primer and black top coat.
Further installation is in the reverse sequence to removal.