A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Remove securing bolt - arrow - on brake disc while holding the disc firmly.
-
Remove disc brake.
‹› When removing the brake disc from the wheel hub, do not tilt the disc.
Installing
Use new bolts.
Clean brake disc, wheel hub and contact surfaces before installing.
-
Place brake disc on hub.
‹› When positioning the brake disc, do not tilt it on the wheel hub.
-
Install securing bolt - arrow - and tighten.
-
Position front brake carrier.
‹› Do not angle the brake carrier when mounting it.