A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
5 - Bleeder valve
‹› Apply a thin coat of assembly paste (G 052 150 A2) to the threads before screwing in.
‹› 15 Nm
6 - Brake caliper housing
7 - Retaining spring
‹› Ensure installation position is correct.
8 - Protective cap
‹› Do not damage when installing piston
‹› Coat with Assembly Paste (G 052 150 A2)
9 - Pistons
‹› First apply thin coat of brake cylinder paste ( G 052 150 A2) on piston
‹› Diameter 57 mm.
10 - Seal
‹› Coat with assembly paste (G 052 150 A2).
11 - Brake carrier
‹› Removing and Installing => [ Brake Caliper with Front Brake Carrier ] See: Brake Caliper with Front Brake Carrier
‹› The 4 retaining pins for the brake pads on the brake carrier must not be loosened under any circumstances.
12 - Bolt
‹› 196 Nm