A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
‹› Only with the threaded version
7
Engine Coolant Temperature (ECT) Sensor (G62 )
‹› Removing and installing, refer to => [ Engine Coolant Temperature Sensor ] See: Engine - Coolant Temperature Sensor/Switch/Service and
Repair
8
O-ring
‹› Replace
9
Coolant pump
‹› Removing and installing, refer to => [ Coolant Pump ] See: Coolant Pump
‹› With a new coolant pump, remove the protective cap
10
Gasket
‹› Replace
11
Centering pin
‹› 2 pieces
12
Toothed belt
‹› For coolant pump
‹› Removing and installing, refer to => [ Coolant Pump Toothed Belt ] See: Coolant Pump Toothed Belt
13
Toothed belt guard
14
Bolt
‹› 9 Nm
15
Bolt
‹› Left thread
‹› 17 Nm
16
Drive gear for toothed belt
‹› Note installation position
17
Shaft seal
‹› Replacing, refer to => [ Coolant Pump Drive Shaft Seal ] See: Coolant Pump Drive Shaft Seal.
18
Balance shaft
19
Coolant thermostat
‹› Removing and installing, refer to => [ Coolant Thermostat ] See: Thermostat/Service and Repair/Coolant Thermostat
20
Centering pin
21
O-ring
‹› Replace
22
Connecting piece