A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Turn the intake camshaft using the wrench in direction of - arrow - and mount the timing chain.
-
Mount the bearing bracket and the bolts - arrows - hand-tight.
-
Remove Locking Pin (T40011).
-
Tighten the bearing bracket bolts - arrows -. Refer to=> [ Camshaft Timing Chain Assembly Overview ] See: Timing Components/Timing
Chain/Service and Repair/Camshaft Timing Chain Assembly Overview.
-
Install control valve => [ (Item 6) Control valve ] See: Timing Components/Timing Chain/Service and Repair/Camshaft Timing Chain Assembly
Overview.
-
Install timing chain upper cover. Refer to => [ Upper Timing Chain Cover ] See: Timing Components/Timing Cover/Service and Repair/Upper
Timing Chain Cover.
-
Install vacuum pump.
-
Install high pressure pump.
-
Install service position..
The rest of the assembly is basically a reverse of the disassembling sequence.