A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Remove the bolts - 1 through 5 - and pull off the accessory assembly bracket from the coolant pump housing.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening specifications. Refer to => [ Ribbed Belt Drive and Accessory Assembly Bracket Assembly Overview ] See: Drive Belt/Service and
Repair/Ribbed Belt Drive and Accessory Assembly Bracket Assembly Overview.
‹› Replace bolts which have been tightened to an additional torque.
‹› Replace O-rings and seals.
-
Coat O-rings - 4 - with coolant additive; coolant.
-
Install connection - 2 - into the coolant pump housing - 3 -.
-
Press the accessory assembly bracket - 1 - onto the connection, mount the bolts and tighten to tightening specification => [ Accessory assembly