A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Make sure both centering pins are installed in the cylinder block.
-
Install connection piece - 2 - into the engine oil cooler - 1 -.
-
Push the coolant pump - 3 - onto the connection piece and onto the centering pins in the cylinder block.
-
Tighten bolts - 1 to 5 -.
‹› If a new coolant pump was installed, then the protective cap - arrow - must be removed.
-
Install coolant pump toothed belt. Refer to => [ Coolant Pump Toothed Belt ] See: Coolant Pump Toothed Belt.
-
Install Throttle Valve Control Module (J338).
-
Install small coolant pipe. Refer to => [ Small Coolant Pipe ] See: Cooling System/Coolant Line/Hose/Service and Repair/Small Coolant Pipe.
-
Fill with coolant. Refer to => [ Filling ] See: Cooling System/Service and Repair/Procedures.