A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-3322002.png)
-
Disconnect electrical wire - 3 - by releasing the retaining spring - arrow A -.
-
Remove the daytime running lamp and parking lamp LED module.
Installing
‹› Tightening specification => [ Bi-Xenon Headlamps with Cornering Lamp Assembly Overview ] See: Headlamp/Service and Repair/Bi-Xenon
Headlamps with Cornering Lamp Assembly Overview.
Install in reverse order of removal, observing the following:
-
Check the seal - 1 - between the LED module and headlamp housing.
-
Install the headlamp housing => [ Headlamp Housing ]. See: Headlamp/Service and Repair/Bi-Xenon Headlamps with Cornering Lamp/Headlamp
Housing
