audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Brake Fluid Level, Checking|Page 1805 > < Brake Fluid Level, Checking|Page 1803
Page 1
background image

Brake Fluid: Service and Repair
Brake Fluid, Changing

Brake Fluid, Changing

‹› Use new Original VW/Audi Brake Fluid only.

change brake fluid with brake charger/bleeder unit (VAS 5234)

CAUTION!
‹› Brake fluid must never come into contact with fluids containing mineral oils (oil, gas, cleaning solutions). Oils containing minerals

damage plugs and sleeves on brake systems.

‹› Brake fluid is poisonous and must not be extracted by mouth using a hose under any circumstances. In addition, it must not come into

contact with paint due to is corrosive effects.

‹› Brake fluid is hygroscopic, meaning that it absorbs moisture from the surrounding air, and must therefore always be stored in

air-tight containers. 

‹› Observe waste disposal regulations!

Brake Fluid, Changing using Brake Charger/Bleeder Unit 

Special tools, testers and auxiliary items required

‹› Brake filling and bleeding tool (VAS 5234)

‹› Reservoir

‹› The brake fluid level in the reservoir must be high enough so that air cannot get into the brake system.

‹› Do not remove the strainer inside the brake fluid reservoir.

‹› Follow Brake Charger/Bleeder Unit (VAS 5234 ) operating instructions!

-

Remove brake fluid reservoir cap - 1 -.

-

Use the hose from the Brake Charger/Bleeder Unit (VAS 5234) to extract as much brake fluid as possible. 

Brake Fluid Level, Checking|Page 1805 > < Brake Fluid Level, Checking|Page 1803