audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Engine Compartment E-Box and A-Pillar Relay Carrier/Fuse Panel Assembly Overview|Page 2044 > < Engine Compartment E-Box and A-Pillar Relay Carrier/Fuse Panel Assembly Overview|Page 2042

A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)

Page 2
background image

‹› For the exact assignment of the driver side A-pillar 6-pin connector station, see the applicable wiring diagram.

Installing

Install in reverse order of removal, observing the following:

-

Install interior CAN cut-off connector (T46i) mount => [ Interior CAN Cut-Off Connector Mount ] See: Powertrain Management/Computers and
Control Systems/Information Bus/Service and Repair/Interior CAN Cut-Off Connector Mount.

-

Connect the airbag electrical connector - 1 - Removal and Installation.

-

Install lower left A-pillar trim.

-

Connect battery. Required actions => [ ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery. 

Engine Compartment E-Box and A-Pillar Relay Carrier/Fuse Panel Assembly Overview|Page 2044 > < Engine Compartment E-Box and A-Pillar Relay Carrier/Fuse Panel Assembly Overview|Page 2042