A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1815003.png)
-
Disconnect electrical connectors - 4 - and remove electrical wire - 3 -.
-
Release retainers - arrows - and remove the fuse panel B (SB) - 1 -.
-
Disengage engine wiring harness at electronics box and lay bare.
-
Remove electrical wire - 5 -.
-
Remove relay - 3 - and control modules - 4 - from fuse panel B (SB).
-
Release retaining clip - arrow -, push fuse panel - 2 - back and out and disengage it.
-
Release retaining clip and press the auxiliary fuse panel - 1 - back and out.
-
Release retaining clips - arrows - and press the relay carrier - 2 - back and out of the bracket - 1 -.
