A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
Wiring Harness: Service and Repair
Suppressor
Suppressor
Observe notes on contact corrosion => [ Contact Corrosion ] See: Service Precautions.
Removing
-
Remove fuse panel B (SB) in the engine compartment E-box => [ Fuse Panel B in Engine Compartment E-Box ] See: Fuse Block/Service and
Repair/Fuse Panel B in Engine Compartment E-Box.
‹› The electrical connectors do not need to be disconnected.
-
Disconnect cable tie - 2 -.
-
Disconnect electrical connector - 1 -.
-
Remove suppressor (C24) - 3 -.
Installing
Install in reverse order of removal, observing the following:
‹› When installing, install cable ties at same location.
-
Install fuse panel B (SB) in the engine compartment E-box => [ Fuse Panel B in Engine Compartment E-Box ] See: Fuse Block/Service and
Repair/Fuse Panel B in Engine Compartment E-Box.