A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
‹› Protective cap prevents contamination of or mechanical damage to end face of fiber optic cable which would impair signal transmission.
Installing
‹› Tightening specification => [ Data Bus OBD Interface Assembly Overview ] See: Data Bus OBD Interface Assembly Overview.
Install in reverse order of removal, observing the following:
If the data bus on board diagnostic interface ( J533) was replace, it must be recoded.
-
Select function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Install glove compartment.