audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pressure Regulator|Testing and Inspection|Page 4185 > < Fuel Pressure Regulator|Testing and Inspection
Page 2
background image

-

Using a multimeter, check the Fuel Pressure Regulator Valve (N276) terminals 1 to 2 for resistance.

Specified value: 25 to 35 ohms (at approx. 20° C)

If the specified value was not obtained:

-

Replace the Fuel Pressure Regulator Valve (N276 ).

If the specified value was obtained:

Checking voltage

Switch the ignition on.

-

Using a multimeter, check the Fuel Pressure Regulator Valve (N276)electrical connector terminal 1 to Ground (GND) for voltage.

Fuel Pressure Regulator|Testing and Inspection|Page 4185 > < Fuel Pressure Regulator|Testing and Inspection