A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-812004.png)
-
Remove mount - 3 - from threaded pins.
-
Disengage retaining pins - 1 - on the mount at the side guide in the A-pillar - arrow - while pulling the mount upward.
Installing
Install in reverse order of removal, observing the following:
‹› Tightening specification => [ Relay/fuse panel mount tightening specifications ] See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Service
and Repair/Wire Junction, Instrument Panel Relay/Fuse Panel and Luggage Compartment Relay/Fuse Panel Assembly Overview.
-
Engage retaining pins - 1 - on the mount - 3 - at the side guide in the A-pillar - arrow -.
