audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Body Control Module|Service and Repair|Page 377 > < All Technical Service Bulletins for Power Distribution Module:|971015|Page 371
Page 1
background image

Body Control Module: Service and Repair

Control Modules

=> [ Vehicle Electrical System Control Module ] 

=> [ Relay/Fuse Panel Mount with Vehicle Electrical System Control Module ] 

=> [ Comfort System Central Control Module ] 

=> [ Special Purpose Vehicle Control Module ] 

Vehicle Electrical System Control Module

Observe notes on contact corrosion => [ Contact Corrosion ] See: Power and Ground Distribution/Wiring Harness/Service Precautions.

Removing

-

If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".

-

Select the function or path:

-

Follow further instructions on display of (VAS 5051B).

-

Switch off ignition and remove ignition key.

-

Remove driver side instrument panel cover

-

Disengage 3-pin relay/fuse carrier by pressing the retaining springs in direction of -  arrow - and remove relay/fuse carrier -  1 -.

Body Control Module|Service and Repair|Page 377 > < All Technical Service Bulletins for Power Distribution Module:|971015|Page 371