A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Disengage the hook - arrow - on the seat position sensor - 2 - from the seat pan lower frame - 1 -.
-
Open the corrugated tube and remove the wire with the 10-pin seat belt latch connector.
‹› Connector station connectors. Refer to => [ Connector Station Connectors ] See: Body and Frame/Seats/Service and Repair/Overhaul/Manual
Standard Front Seats.
‹› Modular wiring routing with corrugated tube on front seat. Refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] See: Body
and Frame/Seats/Service and Repair/Overhaul/Manual Standard Front Seats.
Driver seat: