A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1727005.png)
-
Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.
-
Open pliers again and remove the stripped wire end.
-
Twist bare strands one-half turn.
-
For the repair of a 0.25 mm 2 wire, use a small yellow crimp connector from the Wiring Harness Repair Set (VAS 1978A ).
-
To press the crimp connector, use the Crimping Pliers (Base Tool) (VAS 1978/1-2) with Exchangeable Head, 0.35-2.5mm² (VAS
1978/1-1).
-
Slide the small yellow crimp connector onto both stripped, un-insulated wire ends on the vehicle-specific single wire and crimp them using crimp
pliers.
