A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1897002.png)
-
Remove all dirt on the sensor lens.
-
Position (VAS 6190) at a distance - A - of 120 cm ± 5 cm from sensor lens to mirror surface.
CAUTION!
‹› Place a tool box or container weighing approximately 5 to 7 kg on the (VAS 6190) before installing the measuring sensors and moving
the mirror on the calibration beam.
‹› If weight is not put on the (VAS 6190), it could tip over when the mirror is moved and/or when the measuring sensors are installed.
-
Load the (VAS 6190) with the weight - arrow - as shown in the illustration.
