A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1938008.png)
‹› If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks, tightened as necessary and wiped dry.
‹› Power steering pump is delivered without oil. Therefore, hydraulic oil must be filled before installation and turned by hand. Otherwise, noises
when driving or damage to power steering pump may occur.
Removing
-
Place the vehicle on a hoist.
-
Remove the engine cover upward.
‹› Identify direction of travel before removing ribbed belt. Reversed direction of travel with a used belt can lead to malfunctions. When installing
ribbed belt, make sure it is seated correctly on pulleys.
-
Remove the ribbed belt.
-
Remove the ribbed belt from the power steering pump belt pulley.
-
Extract hydraulic oil from reservoir using (V.A.G 1782 ).
-
Clamp off the suction hose - 1 - and return hose - 2 - using the (3094).
CAUTION!
‹› The (3094) must not be secured on the return hose - 2 - in the check valve area. Otherwise, check valve will be damaged.
‹› The check valve is located in the return hose - 2 - between the hose clamps - arrows -.
-
Remove noise insulation.
-
Place the (VAS 6208) under the power steering pump.
-
Carefully cut through the cable ties - 1 - for the wiring harness - 2 - if applicable.
