A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
Specification for delivery pressure: 120 to 130 bar
If the pressure is not at the specified value, replace the power steering pump. Refer to => [ Power Steering Pump, with Dynamic Steering ] See:
Service and Repair/Power Steering Pump, 4-Cylinder or => [ Power Steering Pump, without Dynamic Steering ] See: Service and Repair/Power
Steering Pump, 4-Cylinder.
-
Switch off engine.
-
Remove (V.A.G 1402).
Tightening specifications: Refer to => [ 4-Cylinder TFSI with Dynamic Steering Assembly Overview ] See: Service and Repair/Removal and
Replacement/4-Cylinder TFSI Engine Assembly Overviews.
-
Note the line installation location when bolting the line connection. The markings - 1 - and - 2 - must be opposite each other.
-
Tighten the union nut - 1 -. Counterhold at the hex head.
-
Tighten the nut - 3 - and the rubber bushing - 4 - if necessary.