A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-2039003.png)
Wheel Bearing Unit Assembly Overview.
-
Slide the wheel bearing housing onto the drive axle splines.
-
Insert both of upper control arm joint pins - 2 - in the wheel bearing housing and insert the bolt - 1 -.
-
Remove the adhesive residue on the ball joint and guide link stub threads.
-
Install the guide link on the wheel bearing housing and tighten.
-
Install the control arm. Refer to => [ Track Control Arm ] See: Control Arm/Service and Repair/Front Suspension/Track Control Arm.
‹› Push the upper control arms down as far as possible while tightening the bolts!
